[PATCH V3 3/4] ARM: dts: bcm2711: Enable thermal
From: Stefan Wahren <wahrenst@gmx.net>
Date: 2020-01-07 18:16:23
Also in:
linux-devicetree, linux-pm
Subsystem:
the rest · Maintainer:
Linus Torvalds
This enables thermal for the BCM2711 (used on Raspberry Pi 4) by adding the AVS monitor and a subnode for the thermal part. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Nicolas Saenz Julienne <redacted> Tested-by: Nicolas Saenz Julienne <redacted> --- arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 961bed8..96f341d 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi@@ -66,6 +66,17 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + avs_monitor: avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xb00>;
@@ -363,6 +374,7 @@ &cpu_thermal { coefficients = <(-487) 410040>; + thermal-sensors = <&thermal>; }; &dsi0 { --
2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel