[PATCH v2 7/7] ARM: dts: stm32: enable firewall controller node on stm32mp157c-ed1
From: Benjamin Gaignard <hidden>
Date: 2020-01-28 15:38:56
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable ETZPC and set configuration for CEC node Signed-off-by: Benjamin Gaignard <redacted> --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 3789312c8539..5b72ef2a54df 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts@@ -6,6 +6,7 @@ /dts-v1/; #include "stm32mp157c-ed1.dts" +#include <dt-bindings/bus/firewall/stm32-etzpc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h>
@@ -77,6 +78,7 @@ &cec { pinctrl-names = "default"; pinctrl-0 = <&cec_pins_a>; + firewall-0 = <&etzpc STM32_ETZPC_CEC STM32_ETZPC_NON_SECURE>; status = "okay"; };
--
2.15.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel