From: Etienne Carriere <redacted>
This change ensures the DMAMUX device is reset only once it is clocked
and that clock is released in a safe state when probe operation fails.
Signed-off-by: Etienne Carriere <redacted>
Signed-off-by: Amelie Delaunay <redacted>
---
drivers/dma/stm32-dmamux.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index 08d2395c8943..a862d3339fb7 100644
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -259,6 +259,12 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare_enable(stm32_dmamux->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+ return ret;
+ }
+
stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
if (!IS_ERR(stm32_dmamux->rst)) {
reset_control_assert(stm32_dmamux->rst);@@ -274,14 +280,6 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- if (!IS_ERR(stm32_dmamux->clk)) {
- ret = clk_prepare_enable(stm32_dmamux->clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
- return ret;
- }
- }
-
pm_runtime_get_noresume(&pdev->dev);
/* Reset the dmamux */@@ -290,8 +288,12 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
- return of_dma_router_register(node, stm32_dmamux_route_allocate,
+ ret = of_dma_router_register(node, stm32_dmamux_route_allocate,
&stm32_dmamux->dmarouter);
+ if (ret)
+ clk_disable_unprepare(stm32_dmamux->clk);
+
+ return ret;
}
#ifdef CONFIG_PM
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel