[PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
From: Faiz Abbas <hidden>
Date: 2020-01-22 08:02:21
Also in:
linux-can, linux-devicetree, lkml, netdev
Subsystem:
can network drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The CAN transceiver on some boards has an STB pin which is used to control its standby mode. Add an optional property stb-gpios to toggle the same. Signed-off-by: Faiz Abbas <redacted> Signed-off-by: Sekhar Nori <redacted> --- Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..cc8ba3f7a2aa 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt@@ -48,6 +48,8 @@ Optional Subnode: that can be used for CAN/CAN-FD modes. See Documentation/devicetree/bindings/net/can/can-transceiver.txt for details. +stb-gpios : gpio node to toggle the STB (standby) signal on the transceiver + Example: SoC dtsi: m_can1: can@20e8000 {
--
2.19.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel