[PATCH AUTOSEL 4.19 259/671] ARM: dts: sun9i: optimus: Fix fixed-regulators
From: Sasha Levin <sashal@kernel.org>
Date: 2020-01-16 17:03:29
Also in:
linux-devicetree, lkml, stable
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Maxime Ripard <redacted>
[ Upstream commit c2a5b554751545023056559121a8ecf86aebe541 ]
Commit 1848f3f44444 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid
warnings") was wrong on the optimus, and instead of droping the
pinctrl-names property, it dropped the regulator-name one.
Obviously, that wasn't what was intended. Reinstate regulator-name and drop
pinctrl-names.
Fixes: 1848f3f44444 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings")
Acked-by: Chen-Yu Tsai <redacted>
Signed-off-by: Maxime Ripard <redacted>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 58a199b0e494..d1e58a6a4343 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts@@ -82,7 +82,7 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high;
@@ -91,7 +91,7 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel