[PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding

From: Anson Huang <hidden>
Date: 2020-01-14 01:30:31
Also in: linux-clk, linux-devicetree, lkml
Subsystem: common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Michael Turquette, Stephen Boyd, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Refine i.MX8MN clock binding by removing useless content and
updating the example, it makes all i.MX8M SoCs' clock binding
aligned.

Signed-off-by: Anson Huang <redacted>
---
No change.
---
 .../devicetree/bindings/clock/imx8mn-clock.yaml    | 48 +---------------------
 1 file changed, 2 insertions(+), 46 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index 622f365..da2103d 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml

@@ -40,7 +40,7 @@ properties:
 
   '#clock-cells':
     const: 1
-    description: |
+    description:
       The clock consumer should specify the desired clock by having the clock
       ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
       for the full list of i.MX8M Nano clock IDs.

@@ -57,7 +57,7 @@ examples:
   - |
     clk: clock-controller@30380000 {
         compatible = "fsl,imx8mn-ccm";
-        reg = <0x0 0x30380000 0x0 0x10000>;
+        reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
         clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
                  <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;

@@ -65,48 +65,4 @@ examples:
                       "clk_ext2", "clk_ext3", "clk_ext4";
     };
 
-  # Required external clocks for Clock Control Module node:
-  - |
-    osc_32k: clock-osc-32k {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <32768>;
-        clock-output-names = "osc_32k";
-    };
-
-    osc_24m: clock-osc-24m {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <24000000>;
-        clock-output-names = "osc_24m";
-    };
-
-    clk_ext1: clock-ext1 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext1";
-    };
-
-    clk_ext2: clock-ext2 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext2";
-    };
-
-    clk_ext3: clock-ext3 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext3";
-    };
-
-    clk_ext4: clock-ext4 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency= <133000000>;
-        clock-output-names = "clk_ext4";
-    };
-
 ...

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help