[PATCH v2 1/6] dt-bindings: i2c: at91: document optional bus recovery properties
From: <Codrin.Ciubotariu@microchip.com>
Date: 2020-01-03 09:49:16
Also in:
linux-devicetree, linux-i2c, lkml
Subsystem:
i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Kamel Bouhara <kamel.bouhara@bootlin.com> The at91 I2C controller can support bus recovery by re-assigning SCL and SDA to gpios. Add the optional pinctrl and gpio properties to do so. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> --- Changes in v2: - none Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 2210f4359c45..551ddabb566b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt@@ -20,8 +20,13 @@ Optional properties: capable I2C controllers. - i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" and "atmel,sama5d2-i2c". +- scl-gpios: specify the gpio related to SCL pin +- sda-gpios: specify the gpio related to SDA pin +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state - Child nodes conforming to i2c bus binding + Examples : i2c0: i2c@fff84000 {
@@ -56,6 +61,11 @@ i2c0: i2c@f8034600 { clocks = <&flx0>; atmel,fifo-size = <16>; i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; wm8731: wm8731@1a { compatible = "wm8731";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel