On Thu, Dec 19, 2019 at 11:02:40PM +0100, Ulf Hansson wrote:

On Thu, 19 Dec 2019 at 19:06, Sudeep Holla [off-list ref] wrote:

quoted

On Thu, Dec 19, 2019 at 04:48:39PM +0100, Ulf Hansson wrote:

quoted

On Thu, 19 Dec 2019 at 15:34, Sudeep Holla [off-list ref] wrote:

quoted

On Wed, Dec 11, 2019 at 04:43:42PM +0100, Ulf Hansson wrote:

quoted

When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.

To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.

The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.

Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning an error code.

Co-developed-by: Lina Iyer <redacted>
Signed-off-by: Lina Iyer <redacted>
Signed-off-by: Ulf Hansson <redacted>
---

Changes in v4:
      - None.

---
 drivers/cpuidle/cpuidle-psci-domain.c | 267 ++++++++++++++++++++++++++
 drivers/cpuidle/cpuidle-psci.c        |   4 +-
 drivers/cpuidle/cpuidle-psci.h        |   5 +
 3 files changed, 274 insertions(+), 2 deletions(-)

diff --git a/drivers/cpuidle/cpuidle-psci-domain.c b/drivers/cpuidle/cpuidle-psci-domain.c
index 656ef3d59149..c2f94ba42222 100644
--- a/drivers/cpuidle/cpuidle-psci-domain.c
+++ b/drivers/cpuidle/cpuidle-psci-domain.c

@@ -7,14 +7,281 @@
  *
  */

+#define pr_fmt(fmt) "CPUidle PSCI: " fmt
+
 #include <linux/cpu.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
+#include <linux/psci.h>
+#include <linux/slab.h>
+#include <linux/string.h>

 #include "cpuidle-psci.h"

+struct psci_pd_provider {
+     struct list_head link;
+     struct device_node *node;
+};
+
+static LIST_HEAD(psci_pd_providers);
+static bool osi_mode_enabled;
+
+static int psci_pd_power_off(struct generic_pm_domain *pd)
+{
+     struct genpd_power_state *state = &pd->states[pd->state_idx];
+     u32 *pd_state;
+
+     /* If we have failed to enable OSI mode, then abort power off. */
+     if (!osi_mode_enabled)
+             return -EBUSY;
+

Why is above check needed ? Shouldn't we have disable/remove pd of
OSI is not enabled ?

Well, failing to enable OSI should in practice not happen, while it
theoretically it could.

I won't assume that. Since it's new and not tested yet, I prefer to assume
it can fail.

Yes, I agree. Hence the degraded mode.

quoted

quoted

My approach to this has been to fall back to use a "degraded mode",
which seems quite common for these kind of situations. The degraded
mode means, we are preventing domain states from being used.

But why can't we just fail registering or remove if already added.

We can, but there are more problems with that than leaving this in a
degraded mode, I think. See more below.

quoted

They are useless for "degraded mode" anyways. And it will ensure that
data->dev is NULL. Sorry now I see why you said it can be NULL but I
would rather not leave those unused genpd in place in case of error.

data->dev would not be NULL in this case, because the
dev_pm_domain_attach_by_name() which is called when we attach the CPU
is going to return an error code, not NULL.

That's because the connection is there in the DTB and thus it must
fail, in this case it would be with -EPROBE_DEFER (waiting for a genpd
provider to be registered).

That would then lead to that the entire cpuidle-psci driver would fail
to initiate/probe. In my opinion, I think it's better to fall back
into a degraded mode, using all the idle states for the CPUs, but just
preventing the cluster idle states.

Just wanted to make this more clear for you to consider. I am happy to
change in any way you suggest, but please confirm that you really want
another behaviour than the degraded mode.

Sorry but if OSI set failed in firmware, it will be operating in default/
PC mode and I *don't* want to create genpd for that. It's confusing.
Even if you don't create all these genpd domains, it is still degraded
mode and we are anyway not changing that. Let me know if my understanding
is wrong here.

I am sure, DTB may get copied to different platform and the firmware may
not support OSI. I know we have logs, but creating and leaving those
genpd domains unused will be just confusing. Please change that.

--
Regards,
Sudeep

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel