Adds support for Amlogic A1 USB Control Glue HW.

The Amlogic A1 SoC Family embeds 1 USB Controllers:
- a DWC3 IP configured as Host for USB2 and USB3

A glue connects the controllers to the USB2 PHY of A1 SoC.

Signed-off-by: Hanjie Lin <redacted>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 69 +++++++++++++++++++++++++++-----------
 1 file changed, 49 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 8a3ec1a..3817daf 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -107,10 +107,22 @@ static const char *phy_names[PHY_COUNT] = {
 	"usb2-phy0", "usb2-phy1", "usb3-phy0",
 };
 
+static const struct clk_bulk_data meson_g12a_clocks[] = {
+	{ .id = NULL},
+};
+
+static const struct clk_bulk_data meson_a1_clocks[] = {
+	{ .id = "usb_ctrl"},
+	{ .id = "usb_bus"},
+	{ .id = "xtal_usb_phy"},
+	{ .id = "xtal_usb_ctrl"},
+};
+
 struct dwc3_meson_g12a {
 	struct device		*dev;
 	struct regmap		*regmap;
-	struct clk		*clk;
+	struct clk_bulk_data    *clks;
+	int num_clks;
 	struct reset_control	*reset;
 	struct phy		*phys[PHY_COUNT];
 	enum usb_dr_mode	otg_mode;

@@ -151,7 +163,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
 				   U2P_R0_POWER_ON_RESET,
 				   U2P_R0_POWER_ON_RESET);
 
-		if (i == USB2_OTG_PHY) {
+		if (i == USB2_OTG_PHY && priv->otg_mode != USB_DR_MODE_HOST) {

 			regmap_update_bits(priv->regmap,
 				U2P_R0 + (U2P_REG_SIZE * i),
 				U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,

@@ -295,7 +307,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
 {
 	int ret;
 
-	if (!priv->phys[USB2_OTG_PHY])
+	if (!priv->phys[USB2_OTG_PHY] || priv->otg_mode == USB_DR_MODE_HOST)

 		return -EINVAL;
 
 	if (mode == PHY_MODE_USB_HOST)

@@ -409,17 +421,32 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 		priv->vbus = NULL;
 	}
 
-	priv->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
+	priv->dev = dev;
+
+	if (of_device_is_compatible(np, "amlogic,meson-g12a-usb-ctrl")) {
+		priv->clks = devm_kmemdup(dev, meson_g12a_clocks,
+					  sizeof(meson_g12a_clocks),
+					  GFP_KERNEL);
+		priv->num_clks = ARRAY_SIZE(meson_g12a_clocks);
+	} else if (of_device_is_compatible(np, "amlogic,meson-a1-usb-ctrl")) {
+		priv->clks = devm_kmemdup(dev, meson_a1_clocks,
+					  sizeof(meson_a1_clocks),
+					  GFP_KERNEL);
+		priv->num_clks = ARRAY_SIZE(meson_a1_clocks);
+	} else {
+		return -EINVAL;
+	}

+
+	if (!priv->clks)
+		return -ENOMEM;
 
-	ret = clk_prepare_enable(priv->clk);
+	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
 	if (ret)
 		return ret;
 
-	devm_add_action_or_reset(dev,
-				 (void(*)(void *))clk_disable_unprepare,
-				 priv->clk);
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, priv);
 	priv->dev = dev;

@@ -433,16 +460,16 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = reset_control_reset(priv->reset);
 	if (ret)
-		return ret;
+		goto err_disable_clks;
 
 	ret = dwc3_meson_g12a_get_phys(priv);
 	if (ret)
-		return ret;
+		goto err_disable_clks;
 
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	/* Get dr_mode */

@@ -458,7 +485,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 						dwc3_meson_g12a_irq_thread,
 						IRQF_ONESHOT, pdev->name, priv);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	dwc3_meson_g12a_usb_init(priv);

@@ -467,7 +494,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	/* Set PHY Power */

@@ -478,10 +505,8 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	}
 
 	ret = of_platform_populate(np, NULL, NULL, dev);
-	if (ret) {
-		clk_disable_unprepare(priv->clk);
+	if (ret)
 		goto err_phys_power;
-	}
 
 	/* Setup OTG mode corresponding to the ID pin */
 	if (priv->otg_mode == USB_DR_MODE_OTG) {

@@ -518,6 +543,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_disable_clks:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
 	return ret;
 }
 

@@ -547,7 +575,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	clk_disable(priv->clk);
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 
 	return 0;
 }

@@ -556,7 +584,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	return clk_enable(priv->clk);
+	return clk_bulk_prepare_enable(priv->num_clks, priv->clks);
 }
 
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)

@@ -620,6 +648,7 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
 
 static const struct of_device_id dwc3_meson_g12a_match[] = {
 	{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
+	{ .compatible = "amlogic,meson-a1-usb-ctrl" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);