[PATCH 00/14] Remove legacy sdma code for dt booting omaps
From: Tony Lindgren <tony@atomide.com>
Date: 2019-12-17 00:19:44
Also in:
dmaengine, linux-devicetree, linux-omap
Hi all,
This series finally removes the legacy sdma code for omaps booting with
devicetree. The legacy sdma code is still left for omap1, but makes
further work a bit easier.
We do the removal of legacy sdma code with the following steps:
- Prepare for platform data removal by probing sdma with device tree
data for the interconnect target module
- Drop unused code and legacy interrupt code for omap2 and later
- Update dmaengine driver to use device tree match data and add
missing features
- Allocate logical channels directly in the dmaengine driver
- Drop legacy platform init and data
The patches are against v5.5-rc1, and need the following fixes:
2c81f0f6d3f5 ("bus: ti-sysc: Fix iterating over clocks")
e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling")
93c60483b5fe ("bus: ti-sysc: Fix missing force mstandby quirk handling")
90bdfa0b05e3 ("ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap")
To make testing easier, I've also pushed out a testing branch at [0][1].
Regards,
Tony
[0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v5.6/sdma-testing
[1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v5.6/sdma-testing
Tony Lindgren (14):
ARM: dts: Add generic compatible for omap sdma instances
ARM: dts: Configure interconnect target module for omap2 sdma
ARM: dts: Configure interconnect target module for omap3 sdma
ARM: OMAP2+: Drop unused sdma functions
ARM: OMAP2+: Drop sdma interrupt handling for mach-omap2
ARM: OMAP2+: Configure sdma capabilities directly
ARM: OMAP2+: Configure dma_plat_info directly and drop dma_dev_attr
dmaengine: ti: omap-dma: Add device tree match data and use it for
cpu_pm
dmaengine: ti: omap-dma: Configure global priority register directly
dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it
dmaengine: ti: omap-dma: Allocate channels directly
dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2
ARM: OMAP2+: Drop legacy init for sdma
ARM: OMAP2+: Drop legacy platform data for sdma
arch/arm/boot/dts/dra7-l4.dtsi | 3 +-
arch/arm/boot/dts/omap2.dtsi | 43 +-
arch/arm/boot/dts/omap2430.dtsi | 4 +
arch/arm/boot/dts/omap3-n900.dts | 5 +
arch/arm/boot/dts/omap3.dtsi | 46 +-
arch/arm/boot/dts/omap36xx.dtsi | 4 +
arch/arm/boot/dts/omap4-l4.dtsi | 3 +-
arch/arm/boot/dts/omap5-l4.dtsi | 3 +-
arch/arm/mach-omap2/common.h | 3 +
arch/arm/mach-omap2/dma.c | 119 +----
arch/arm/mach-omap2/omap_device.c | 170 -------
arch/arm/mach-omap2/omap_device.h | 4 -
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 34 --
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 34 --
.../mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 18 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 61 ---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 69 ---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 61 ---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 61 ---
arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 -
arch/arm/mach-omap2/pdata-quirks.c | 1 +
arch/arm/mach-omap2/pm24xx.c | 22 +-
arch/arm/mach-omap2/pm34xx.c | 5 -
arch/arm/plat-omap/dma.c | 471 +-----------------
drivers/dma/ti/omap-dma.c | 288 ++++++++++-
include/linux/omap-dma.h | 18 -
26 files changed, 391 insertions(+), 1160 deletions(-)
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel