Hi all,

I was examining the H6 BSP clock driver[1] for guidance when porting an
AR100 firmware[2] to the H6 SoC. I found some inconsistencies between
that code and the sunxi-ng driver.

I don't have a good way to verify the first patch. Someone with an
oscilloscope could set the divider and check the I2C/RSB frequency.

Patch 2 should have no functional change.

Patch 3 was verified by benchmarking. Details are in the commit message.

[1]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux
[2]: https://github.com/crust-firmware/crust

Samuel Holland (3):
  clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock
  clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition
  clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order

 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 16 +++-------------
 drivers/clk/sunxi-ng/ccu-sun8i-r.c     | 21 +++------------------
 2 files changed, 6 insertions(+), 31 deletions(-)

-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel