Re: [PATCH v10 06/12] soc: mediatek: Use bp_table for all compatibles
From: Weiyi Lu <hidden>
Date: 2019-12-20 03:31:06
Also in:
linux-mediatek, lkml
On Thu, 2019-12-19 at 11:54 +0800, Nicolas Boichat wrote:
On Wed, Dec 18, 2019 at 4:31 PM Weiyi Lu [off-list ref] wrote:quoted
Only use bp_table for bus protection of all compatibles, instead of mixing bus_prot_mask and bus_prot_reg_update.ditto, I'd just squash in the previous patch.
OK, I'll update in next version.
quoted
Signed-off-by: Weiyi Lu <redacted> --- drivers/soc/mediatek/mtk-scpsys.c | 94 ++++++++++++++++++++------------------- 1 file changed, 48 insertions(+), 46 deletions(-)diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 5699d9f..c438c53 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c@@ -11,7 +11,6 @@ #include <linux/platform_device.h> #include <linux/pm_domain.h> #include <linux/regulator/consumer.h> -#include <linux/soc/mediatek/infracfg.h> #include <linux/soc/mediatek/scpsys-ext.h> #include <dt-bindings/power/mt2701-power.h>@@ -88,7 +87,6 @@ * @ctl_offs: The offset for main power control register. * @sram_pdn_bits: The mask for sram power control bits. * @sram_pdn_ack_bits: The mask for sram power control acked bits. - * @bus_prot_mask: The mask for single step bus protection. * @basic_clk_name: The basic clocks required by this power domain. * @caps: The flag for active wake-up action. * @bp_table: The mask table for multiple step bus protection.@@ -99,7 +97,6 @@ struct scp_domain_data { int ctl_offs; u32 sram_pdn_bits; u32 sram_pdn_ack_bits; - u32 bus_prot_mask; const char *basic_clk_name[MAX_CLKS]; u8 caps; struct bus_prot bp_table[MAX_STEPS];@@ -128,7 +125,6 @@ struct scp { struct regmap *infracfg; struct regmap *smi_common; struct scp_ctrl_reg ctrl_reg; - bool bus_prot_reg_update; }; struct scp_subdomain {@@ -142,7 +138,6 @@ struct scp_soc_data { const struct scp_subdomain *subdomains; int num_subdomains; const struct scp_ctrl_reg regs; - bool bus_prot_reg_update; }; static int scpsys_domain_is_on(struct scp_domain *scpd)@@ -256,12 +251,6 @@ static int scpsys_bus_protect_enable(struct scp_domain *scpd) { struct scp *scp = scpd->scp; - if (scpd->data->bus_prot_mask) { - return mtk_infracfg_set_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - } - return mtk_scpsys_ext_set_bus_protection(scpd->data->bp_table, scp->infracfg, scp->smi_common); }@@ -270,12 +259,6 @@ static int scpsys_bus_protect_disable(struct scp_domain *scpd) { struct scp *scp = scpd->scp; - if (scpd->data->bus_prot_mask) { - return mtk_infracfg_clear_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - } - return mtk_scpsys_ext_clear_bus_protection(scpd->data->bp_table, scp->infracfg, scp->smi_common); }@@ -412,8 +395,7 @@ static int init_basic_clks(struct platform_device *pdev, struct clk **clk, static struct scp *init_scp(struct platform_device *pdev, const struct scp_domain_data *scp_domain_data, int num, - const struct scp_ctrl_reg *scp_ctrl_reg, - bool bus_prot_reg_update) + const struct scp_ctrl_reg *scp_ctrl_reg) { struct genpd_onecell_data *pd_data; struct resource *res;@@ -427,8 +409,6 @@ static struct scp *init_scp(struct platform_device *pdev, scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs; scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs; - scp->bus_prot_reg_update = bus_prot_reg_update; - scp->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0);@@ -549,8 +529,10 @@ static void mtk_register_power_domains(struct platform_device *pdev, .name = "conn", .sta_mask = PWR_STATUS_CONN, .ctl_offs = SPM_CONN_PWR_CON, - .bus_prot_mask = MT2701_TOP_AXI_PROT_EN_CONN_M | - MT2701_TOP_AXI_PROT_EN_CONN_S, + .bp_table = { + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228, + BIT(2) | BIT(8), BIT(2) | BIT(8)), + },I'm a bit sad we lose the information about the BIT meaning.
I'll keep those information in next version.
Of course this looks ugly and verbose:
BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
MT2701_TOP_AXI_PROT_EN_CONN_M |
MT2701_TOP_AXI_PROT_EN_CONN_S,
MT2701_TOP_AXI_PROT_EN_CONN_M |
MT2701_TOP_AXI_PROT_EN_CONN_S),
But if you make "check_clr_mask" a boolean, you wouldn't have to
repeat the mask twice and you could keep the nice register bit
definitions.Thanks for the suggestion, I'll add "ignore_clr_ack" for it in next version.
[snip, many similar occurences below]
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel