Thread (17 messages) 17 messages, 4 authors, 2020-01-06
STALE2370d

[PATCH V2 4/7] dt-bindings: imx-gpcv2: Update bindings to support i.MX8M Mini

From: Adam Ford <hidden>
Date: 2019-12-13 20:39:03
Also in: linux-devicetree, lkml
Subsystem: open firmware and flattened device tree bindings, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

The with the recent additions to the driver, the GPCv2 driver can
support the i.MX8M Mini, but it needs updated 'compatible' entry
to use the proper table.

This patch adds the i.MX8MM to the compatible list of devices.

Signed-off-by: Adam Ford <redacted>
---
V2:  No Change

 Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
index 7c7e972aaa42..576a79097a4c 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
@@ -9,6 +9,7 @@ Required properties:
 - compatible: Should be one of:
 	- "fsl,imx7d-gpc"
 	- "fsl,imx8mq-gpc"
+	- "fsl,imx8mm-gpc"
 
 - reg: should be register base and length as documented in the
   datasheet
@@ -24,8 +25,9 @@ which, in turn, is expected to contain the following:
 Required properties:
 
 - reg: Power domain index. Valid values are defined in
-  include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
-  include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+  include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc,
+  include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc, and
+  include/dt-bindings/power/imx8m-power.h for fsl,imx8mm-gpc
 
 - #power-domain-cells: Should be 0
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help