Re: [PATCH v3 2/4] media: vicodec: use v4l2-mem2mem draining, stopped and next-buf-is-last states handling

On 12/9/19 1:20 PM, Neil Armstrong wrote:

Use the previously introduced v4l2-mem2mem core APIs to handle the drainig,
stopped and next-buf-is-last states.

With these changes, the v4l2-compliance still passes with the following
commands :
# v4l2-ctl --stream-mmap --stream-out-mmap --stream-to-hdr out.comp --stream-from in.yuv

quoted

quoted

quoted

quoted

<><><><><><><><><><><><><><><><>< 15.53 fps

 15.53 fps

quoted

<><><><><><><><><><><><>< 13.99 fps

 13.99 fps

quoted

<><><><><><><><><><><>< 13.52 fps

 13.52 fps

quoted

<><><><><><><><><><><><>< 13.41 fps

 13.41 fps

quoted

<><><><><><><><><><><><>< 13.21 fps

 13.21 fps

quoted

<><><><><><><><><><><>< 13.09 fps

 13.09 fps

quoted

<><><><><><><

STOP ENCODER
<<<
EOS EVENT

# v4l2-compliance --stream-from in.yuv -s
v4l2-compliance SHA: 7ead0e1856b89f2e19369af452bb03fd0cd16793, 64 bits
[...]
Total for vicodec device /dev/video0: 50, Succeeded: 50, Failed: 0, Warnings: 0

The full output is available at [1]

# v4l2-compliance -d1 --stream-from-hdr out.comp -s
v4l2-compliance SHA: 7ead0e1856b89f2e19369af452bb03fd0cd16793, 64 bits
[...]
Total for vicodec device /dev/video1: 50, Succeeded: 50, Failed: 0, Warnings: 0

The full output is available at [2]

No functional changes should be noticed.

Ah, unfortunately there *are* functional changes.

There is a (much) more extensive test that is done in the test-media script.

In v4l-utils, go to contrib/test. Now run (as root): test-media vicodec

This test now fails on some tests for the stateful decoder:

Streaming ioctls:
        test read/write: OK (Not Supported)
        test blocking wait: OK
                fail: v4l2-test-buffers.cpp(943): ret == 0
                fail: v4l2-test-buffers.cpp(1353): captureBufs(node, node_m2m_cap, q, m2m_q, frame_count, pollmode, capture_count)
        test MMAP (select): FAIL
                fail: v4l2-test-buffers.cpp(951): ret == 0
                fail: v4l2-test-buffers.cpp(1353): captureBufs(node, node_m2m_cap, q, m2m_q, frame_count, pollmode, capture_count)
        test MMAP (epoll): FAIL
                fail: v4l2-test-buffers.cpp(943): ret == 0
                fail: v4l2-test-buffers.cpp(1607): captureBufs(node, node_m2m_cap, q, m2m_q, frame_count, pollmode, capture_count)
        test USERPTR (select): FAIL
                fail: v4l2-test-buffers.cpp(943): ret == 0
                fail: v4l2-test-buffers.cpp(1761): captureBufs(node, node_m2m_cap, q, m2m_q, frame_count, pollmode, capture_count)
        test DMABUF (select): FAIL

I also see this:

cmp: EOF on /tmp/tmp.7KAXKAIkVZ/raw.yu12.1280.24 after byte 23500800, in line 1

which shouldn't be there either.

I can recommend the test-media script: it can test all the virtual drivers and it is
part of the daily build to check for regressions.

Regards,

	Hans

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel