This series enables thermal support for the Raspberry Pi 4. Neither the
bcm2835_thermal nor the brcmstb_thermal are suitable for the BCM2711.
So add a new thermal driver to read out the SoC temperature from the
AVS RO block of the BCM2711.

Stefan Wahren (4):
  dt-bindings: Add BCM2711 thermal
  thermal: Add BCM2711 thermal driver
  ARM: dts: bcm2711: Enable thermal
  ARM: configs: Build BCM2711 thermal as module

 .../bindings/thermal/brcm,bcm2711-thermal.txt      |  39 ++++++
 arch/arm/boot/dts/bcm2711.dtsi                     |   9 ++
 arch/arm/configs/multi_v7_defconfig                |   1 +
 arch/arm64/configs/defconfig                       |   1 +
 drivers/thermal/broadcom/Kconfig                   |   8 ++
 drivers/thermal/broadcom/Makefile                  |   1 +
 drivers/thermal/broadcom/bcm2711_thermal.c         | 146 +++++++++++++++++++++
 7 files changed, 205 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2711-thermal.txt
 create mode 100644 drivers/thermal/broadcom/bcm2711_thermal.c

--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel