add peripheral pinctrl controller to a1 SoC

Signed-off-by: Qianggui Song <redacted>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..0965259af869 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi

@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";

@@ -74,6 +75,23 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";