Thread (4 messages) 4 messages, 2 authors, 2019-11-22
STALE2384d
Revisions (7)
  1. v1 [diff vs current]
  2. v4 current
  3. v5 [diff vs current]
  4. v6 [diff vs current]
  5. v7 [diff vs current]
  6. v8 [diff vs current]
  7. v9 [diff vs current]

[PATCH v4 3/4] dt-bindings: Add binding for IT6505.

From: allen <hidden>
Date: 2019-11-15 10:05:17
Also in: dri-devel, linux-devicetree, linux-mediatek, lkml
Subsystem: drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, open firmware and flattened device tree bindings, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Allen Chen <redacted>

Add a DT binding documentation for IT6505.

Signed-off-by: Allen Chen <redacted>
Signed-off-by: Pi-Hsun Shih <redacted>
---
 .../bindings/display/bridge/ite,it6505.txt         | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
new file mode 100644
index 00000000..72da0c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
@@ -0,0 +1,28 @@
+iTE it6505 DP bridge bindings
+
+Required properties:
+        - compatible: "ite,it6505"
+        - reg: i2c address of the bridge
+        - ovdd-supply: I/O voltage
+        - pwr18-supply: Core voltage
+        - interrupts: interrupt specifier of INT pin
+        - reset-gpios: gpio specifier of RESET pin
+	- hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	- port@[x]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+
+Example:
+	dp-bridge@5c {
+                compatible = "ite,it6505";
+                interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
+                reg = <0x5c>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&it6505_pins>;
+                ovdd-supply = <&mt6358_vsim1_reg>;
+                pwr18-supply = <&it6505_pp18_reg>;
+                reset-gpios = <&pio 179 1>;
+                hpd-gpios = <&pio 9 0>;
+                extcon = <&usbc_extcon>;
+        };
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help