Re: [PATCH v2] pinctrl: at91: Enable slewrate by default on SAM9X60
From: Linus Walleij <hidden>
Date: 2019-11-03 22:35:56
Also in:
linux-devicetree, linux-gpio, lkml
On Fri, Nov 1, 2019 at 10:20 AM Codrin Ciubotariu [off-list ref] wrote:
On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> --- Changes in v2: - updated commit message to reflect the ABI change
Patch applied with the ACKs. Yours, Linus Walleij _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel