[PATCH V2 1/4] clk: tegra: mark fuse clock as critical
- From
- Stephen Warren <hidden>
- Date
- 2019-10-03 20:18:45
- Also in
- linux-clk, linux-tegra
From: Stephen Warren <redacted>
For a little over a year, U-Boot on Tegra124 has configured the flow
controller to perform automatic RAM re-repair on off->on power transitions
of the CPU rail1]. This is mandatory for correct operation of Tegra124.
However, RAM re-repair relies on certain clocks, which the kernel must
enable and leave running. The fuse clock is one of those clocks. Mark this
clock as critical so that LP1 power mode (system suspend) operates
correctly.
[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Cc: <redacted>
Signed-off-by: Stephen Warren <redacted>
---
v2: Set CRITICAL flag on the clock, rather than enabling it in
tegra124_init_table[].
---
drivers/clk/tegra/clk-tegra-periph.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 1ed85f120a1b..76dd91eebd13 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c@@ -785,7 +785,7 @@ static struct tegra_periph_init_data gate_clks[] = { GATE("ahbdma", "hclk", 33, 0, tegra_clk_ahbdma, 0), GATE("apbdma", "pclk", 34, 0, tegra_clk_apbdma, 0), GATE("kbc", "clk_32k", 36, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_kbc, 0), - GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, 0), + GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, CLK_IS_CRITICAL), GATE("fuse_burn", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse_burn, 0), GATE("kfuse", "clk_m", 40, TEGRA_PERIPH_ON_APB, tegra_clk_kfuse, 0), GATE("apbif", "clk_m", 107, TEGRA_PERIPH_ON_APB, tegra_clk_apbif, 0),
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel