[PATCH 1/4] clk: tegra: Enable fuse clock on Tegra124

From
Stephen Warren <hidden>
Date
2019-10-01 21:21:51
Also in
linux-clk, linux-tegra
From: Stephen Warren <redacted>

For a little over a year, U-Boot has configured the flow controller to
perform automatic RAM re-repair on off->on power transitions of the CPU
rail1]. This is mandatory for correct operation of Tegra124. However, RAM
re-repair relies on certain clocks, which the kernel must enable and
leave running. The fuse clock is one of those clocks. Enable this clock
so that LP1 power mode (system suspend) operates correctly.

[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair

Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Cc: <redacted>
Signed-off-by: Stephen Warren <redacted>
---
 drivers/clk/tegra/clk-tegra124.c | 1 +
 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 0224fdc4766f..f53f6315c646 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1291,6 +1291,7 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
 };
 
 static struct tegra_clk_init_table tegra124_init_table[] __initdata = {
+	{ TEGRA124_CLK_FUSE, -1, 0, 1 },
 	{ TEGRA124_CLK_SOC_THERM, TEGRA124_CLK_PLL_P, 51000000, 0 },
 	{ TEGRA124_CLK_CCLK_G, TEGRA124_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA124_CLK_HDA, TEGRA124_CLK_PLL_P, 102000000, 0 },
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (13 messages) 13 messages, 3 authors, last reply 2019-10-04
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help