Re: [PATCH 3/3] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000

On Tue, Oct 29, 2019 at 10:52 AM Andreas Färber [off-list ref] wrote:

Am 29.10.19 um 16:41 schrieb Rob Herring:

quoted

On Mon, Oct 21, 2019 at 04:10:35AM +0200, Andreas Färber wrote:

quoted

Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.

Reuse the existing RTD1295 watchdog compatible for now.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/Makefile               |   2 +
 arch/arm/boot/dts/rtd1195-mele-x1000.dts |  30 ++++++++
 arch/arm/boot/dts/rtd1195.dtsi           | 128 +++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+)
 create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
 create mode 100644 arch/arm/boot/dts/rtd1195.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 73d33611c372..89a951485da8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile

@@ -858,6 +858,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_RDA) += \
     rda8810pl-orangepi-2g-iot.dtb \
     rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+    rtd1195-mele-x1000.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
     arm-realview-pb1176.dtb \
     arm-realview-pb11mp.dtb \

diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..ce9a255950d3
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017 Andreas Färber

2019?

Nope, I am flushing out old queues, and updating SPDX line does not
really warrant a copyright bump IMO. The changes below would though.

quoted

quoted

+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+    compatible = "mele,x1000", "realtek,rtd1195";
+    model = "MeLE X1000";
+
+    aliases {
+            serial0 = &uart0;
+    };
+
+    chosen {
+            stdout-path = "serial0:115200n8";
+    };
+
+    memory {

memory@0

Will test.

quoted

quoted

+            device_type = "memory";
+            reg = <0x0 0x40000000>;
+    };
+};
+
+&uart0 {
+    status = "okay";
+};

diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..475740c67d26
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi

@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000c000; /* boot code */
+/memreserve/ 0x0000c000 0x000f4000;
+/memreserve/ 0x01b00000 0x00400000; /* audio */
+/memreserve/ 0x01ffe000 0x00004000; /* rpc ringbuf */
+/memreserve/ 0x10000000 0x00100000; /* secure */
+/memreserve/ 0x17fff000 0x00001000;
+/memreserve/ 0x18000000 0x00100000; /* rbus */
+/memreserve/ 0x18100000 0x01000000; /* nor */

You shouldn't have the same entries here and in /reserved-memory. There
was a time before /reserved-memory was fully supported, but we should be
well past that now.

I am dealing with a v2012.07 based downstream U-Boot that I do not have
sources for, so I wouldn't be so sure there... It will only respect
memreserve I think, whereas reserved-memory below is for the kernel, no?

Sigh... Well, that may be too old. :(

I could be wrong too and no one ever added /reserved-memory support
for u-boot. The intent was never that one was for u-boot and the other
for the kernel. The kernel handles both. reserved-memory was to
overcome the limitations of memreserve.

quoted

quoted

+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+    compatible = "realtek,rtd1195";
+    interrupt-parent = <&gic>;
+    #address-cells = <1>;
+    #size-cells = <1>;
+
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                    device_type = "cpu";
+                    compatible = "arm,cortex-a7";
+                    reg = <0x0>;
+                    clock-frequency = <1000000000>;
+            };
+
+            cpu1: cpu@1 {
+                    device_type = "cpu";
+                    compatible = "arm,cortex-a7";
+                    reg = <0x1>;
+                    clock-frequency = <1000000000>;
+            };
+    };
+
+    reserved-memory {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            secure@10000000 {
+                    reg = <0x10000000 0x100000>;
+                    no-map;
+            };
+
+            rbus@18000000 {
+                    reg = <0x18000000 0x100000>;
+                    no-map;

This doesn't look right as it overlaps the register space.

Will try dropping it. James?

quoted

quoted

+            };
+
+            nor@18100000 {
+                    reg = <0x18100000 0x1000000>;
+                    no-map;
+            };

Same issue here, I guess?

Yes.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel