Re: [PATCH 2/2] ARM: dts: at91: add a common kizboxmini dtsi file
From: Rob Herring <robh@kernel.org>
Date: 2019-10-29 12:34:31
Also in:
linux-devicetree, lkml
On Fri, Oct 18, 2019 at 04:03:04PM +0200, Kamel Bouhara wrote:
quoted hunk ↗ jump to hunk
Split the Kizbox Mini boards into two board configuration, the Kizboxmini Mother board and the Kizboxmini RailDIN board. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by: Kévin RAYMOND <redacted> Signed-off-by: Mickael GARDET <redacted> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/at91-kizboxmini-mb.dts | 38 ++++ arch/arm/boot/dts/at91-kizboxmini-rd.dts | 54 ++++++ arch/arm/boot/dts/at91-kizboxmini_common.dtsi | 166 ++++++++++++++++++ 4 files changed, 260 insertions(+) create mode 100644 arch/arm/boot/dts/at91-kizboxmini-mb.dts create mode 100644 arch/arm/boot/dts/at91-kizboxmini-rd.dts create mode 100644 arch/arm/boot/dts/at91-kizboxmini_common.dtsidiff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c976b72a4c94..6b3a65f3f6f8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -38,6 +38,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ at91-kizboxmini.dtb \ + at91-kizboxmini-mb.dtb \ + at91-kizboxmini-rd.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts new file mode 100644 index 000000000000..52921f547dd6 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini_common.dtsi" + +/ { + model = "Overkiz Kizbox Mini Mother Board"; + compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + slow_xtal {
Don't use '_' in node names.
quoted hunk ↗ jump to hunk
+ clock-frequency = <32768>; + }; + }; + + pwm_leds { + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + }; +}; + +&usb0 { + num-ports = <2>; +}; + +&rtc { + status = "okay"; +}; +diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts new file mode 100644 index 000000000000..1d2db8e16271 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts@@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini_common.dtsi" + +/ { + model = "Overkiz Kizbox Mini RailDIN"; + compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + adc_op_clk { + status = "okay"; + }; + }; +}; + +&pinctrl { + adc0 { + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&usart0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&leds { + blue { + status = "okay"; + }; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + atmel,adc-channels-used = <0x0020>; + status = "okay"; +};diff --git a/arch/arm/boot/dts/at91-kizboxmini_common.dtsi b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi new file mode 100644 index 000000000000..2598b776a278 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi@@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board + * + * Copyright (C) 2014-2018 Overkiz SAS + * Author: Antoine Aubert <a.aubert@overkiz.com> + * Gaël Portay <g.portay@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + * Dorian Rocipon <d.rocipon@overkiz.com> + */ +#include "at91sam9g25.dtsi" + +/ { + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory {
memory@20000000 Build your dtb with W=12 and fix any new warnings (feel free to fix existing ones too :) ).
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
+ adc_op_clk {
+ status = "disabled";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+ };
+
+ leds: pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "none";
+ status = "disabled";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&usart0 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+ &pinctrl_pwm0_pwm1_1
+ &pinctrl_pwm0_pwm2_1>;
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&adc0 {
+ status = "disabled";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&ebi {
+ pinctrl-0 = <&pinctrl_ebi_addr_nand
+ &pinctrl_ebi_data_0_7>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_oe_we
+ &pinctrl_nand_cs
+ &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ num-ports = <1>;
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
--
2.23.0_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel