Re: [PATCH 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
From: Rob Herring <robh@kernel.org>
Date: 2019-10-15 19:23:33
Also in:
linux-gpio, lkml
On Fri, Oct 04, 2019 at 02:25:24PM +1300, Chris Packham wrote:
This GPIO controller is present on a number of Broadcom switch ASICs with integrated SoCs. It is similar to the nsp-gpio and iproc-gpio blocks but different enough to require a separate driver. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- .../bindings/gpio/brcm,xgs-iproc.txt | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt
Please make this a DT schema.
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt new file mode 100644 index 000000000000..328b844c82dc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt@@ -0,0 +1,41 @@ +Broadcom XGS iProc GPIO controller + +This controller is the Chip Common A GPIO present on a number of Broadcom +switch ASICs with integrated SoCs. + +Required properties: +- compatible: + Must be "brcm,iproc-gpio-cca" + +- reg: + The first region defines the base I/O address containing + the GPIO controller registers. The second region defines + the I/O address containing the Chip Common A interrupt + registers. + +Optional properties: + +- interrupts: + The interrupt shared by all GPIO lines for this controller. + +- #interrupt-cells: + Should be <2>. The first cell is the GPIO number, the second should specify + flags. + + See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +- interrupt-controller: + Marks the device node as an interrupt controller + +Example: + gpioa: gpio@18000060 { + compatible = "brcm,iproc-gpio-cca"; + #gpio-cells = <2>;
Not documented...
+ reg = <0x18000060 0x50>, + <0x18000000 0x50>; + ngpios = <12>;
Not documented.
+ gpio-controller;
Not documented.
+ interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + }; -- 2.23.0
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel