On Wed, Oct 02, 2019 at 06:06:30PM +0200, Krzysztof Kozlowski wrote:

Convert Generic Power Domain bindings to DT schema format using
json-schema.  The consumer bindings are split to separate file.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Select all nodes for consumers,
2. Remove from consumers duplicated properties with dt-schema,
3. Fix power domain pattern,
4. Remove unneeded types.
---
 .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
 .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
 .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
 .../bindings/clock/clk-exynos-audss.txt       |   2 +-
 .../bindings/clock/exynos5433-clock.txt       |   4 +-
 .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
 .../clock/renesas,r8a7778-cpg-clocks.txt      |   2 +-
 .../clock/renesas,r8a7779-cpg-clocks.txt      |   2 +-
 .../clock/renesas,rcar-gen2-cpg-clocks.txt    |   2 +-
 .../bindings/clock/renesas,rz-cpg-clocks.txt  |   2 +-
 .../bindings/clock/ti/davinci/psc.txt         |   2 +-
 .../bindings/display/etnaviv/etnaviv-drm.txt  |   2 +-
 .../devicetree/bindings/display/msm/dpu.txt   |   2 +-
 .../devicetree/bindings/display/msm/mdp5.txt  |   2 +-
 .../devicetree/bindings/dsp/fsl,dsp.yaml      |   2 +-
 .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
 .../bindings/media/imx7-mipi-csi2.txt         |   3 +-
 .../bindings/media/mediatek-jpeg-decoder.txt  |   3 +-
 .../bindings/media/mediatek-mdp.txt           |   3 +-
 .../bindings/opp/qcom-nvmem-cpufreq.txt       |   2 +-
 .../devicetree/bindings/pci/pci-keystone.txt  |   2 +-
 .../bindings/phy/ti,phy-am654-serdes.txt      |   2 +-
 .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
 .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
 .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
 .../power/power-domain-consumers.yaml         | 105 +++++++++
 .../bindings/power/power-domain.yaml          | 134 ++++++++++++
 .../bindings/power/power_domain.txt           | 205 ------------------
 .../devicetree/bindings/power/qcom,rpmpd.txt  |   2 +-
 .../bindings/power/renesas,rcar-sysc.txt      |   2 +-
 .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
 .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
 .../bindings/soc/mediatek/scpsys.txt          |   2 +-
 .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
 .../bindings/usb/nvidia,tegra124-xusb.txt     |   4 +-
 MAINTAINERS                                   |   2 +-
 37 files changed, 278 insertions(+), 241 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/power-domain-consumers.yaml
 create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
 delete mode 100644 Documentation/devicetree/bindings/power/power_domain.txt

I don't like this split. We should move the contents of this file to the 
above file.

I checked the authorship of the relevant lines and they are all except 
for a small number of lines from Linaro authors (Viresh and Ulf). I have 
permission from Linaro to dual license Linaro authored bindings, so it's 
not a problem to move this. I can do that and you can just drop this file.

+
+properties:
+  required-opps:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This contains phandle to an OPP node in another device's OPP table.
+      It may contain an array of phandles, where each phandle points to an OPP
+      of a different device. It should not contain multiple phandles to the OPP
+      nodes in the same OPP table. This specifies the minimum required OPP
+      of the device(s), whose OPP's phandle is present in this property,
+      for the functioning of the current device at the current OPP (where this
+      property is present).
+
+examples:
+  - |
+    leaky-device@12350000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12350000 0x1000>;
+      power-domains = <&power 0>;
+      power-domain-names = "io";
+    };
+
+    leaky-device@12351000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12351000 0x1000>;
+      power-domains = <&power 0>, <&power 1> ;
+      power-domain-names = "io", "clk";
+    };
+
+    // The first example above defines a typical PM domain consumer device, which is
+    // located inside a PM domain with index 0 of a power controller represented by a
+    // node with the label "power".
+    // In the second example the consumer device are partitioned across two PM domains,
+    // the first with index 0 and the second with index 1, of a power controller that
+    // is represented by a node with the label "power".
+
+  - |
+    // Example with  OPP table for domain provider that provides two domains:
+
+    domain0_opp_table: opp-table0 {
+      compatible = "operating-points-v2";
+
+      domain0_opp_0: opp-1000000000 {
+        opp-hz = /bits/ 64 <1000000000>;
+        opp-microvolt = <975000 970000 985000>;
+      };
+      domain0_opp_1: opp-1100000000 {
+        opp-hz = /bits/ 64 <1100000000>;
+        opp-microvolt = <1000000 980000 1010000>;
+      };
+    };
+
+    domain1_opp_table: opp-table1 {
+      compatible = "operating-points-v2";
+
+      domain1_opp_0: opp-1200000000 {
+        opp-hz = /bits/ 64 <1200000000>;
+        opp-microvolt = <975000 970000 985000>;
+      };
+      domain1_opp_1: opp-1300000000 {
+        opp-hz = /bits/ 64 <1300000000>;
+        opp-microvolt = <1000000 980000 1010000>;
+      };
+    };
+
+    power: power-controller@12340000 {
+      compatible = "foo,power-controller";
+      reg = <0x12340000 0x1000>;
+      #power-domain-cells = <1>;
+      operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>;
+    };
+
+    leaky-device0@12350000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12350000 0x1000>;
+      power-domains = <&power 0>;
+      required-opps = <&domain0_opp_0>;
+    };
+
+    leaky-device1@12350000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12350000 0x1000>;
+      power-domains = <&power 1>;
+      required-opps = <&domain1_opp_1>;
+    };

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel