[PATCH 6/6] arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2019-09-19 05:29:13
Also in:
linux-devicetree, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Few, know rk808 pmic regulators VCC[1-4], VCC[6-7], VCC[9-11], VDD_LOG, VDD_GPU, VDD_CPU_B, VCC3V3_SYS are inputting with vcc_sys which is 5V power rail from dc_12v. So, replace the vin-supply of above mentioned regulators with vcc_sys as per the PMIC-RK808-D page of roc-rk3399-pc schematics. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .../rk3399-libretech-roc-rk3399-pc.dts | 26 +++++++++---------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts
index 51242ea5447d..1eddb2e00809 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts@@ -85,7 +85,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&vcc_sys>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
@@ -129,7 +129,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; }; };
@@ -202,16 +202,16 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc1v8_pmu>;
@@ -385,7 +385,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend;
@@ -404,7 +404,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend;
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel