On Tuesday, August 27, 2019 1:53:04 PM CEST, Felipe Balbi wrote:

Hi,

Vicente Bergas [off-list ref] writes:

quoted

On Saturday, August 17, 2019 7:41:40 PM CEST, Vicente Bergas wrote:

quoted

Otherwise the device keeps writing to memory after kexec and disturbs
the next kernel.

...

why don't you just have shutdown use the same exact function as remove?
Frankly, though, I still don't fully understand what's going wrong
here. Why is the device still alive during kexec?

cheers

Hi Felipe,
the remove and shutdown functions have different prototypes, so
shutdown is wrapping remove.
Would it be preferable to cast remove as shutdown?

The issue with kexec is that the device is being used during the livetime
of the first kernel. When the first kernel executes kexec it calls the
shutdown function of drivers (instead of remove). Because of this the dwc3
device keeps doing things like DMA.
While the second kernel is taking over, it gets its memory corrupted with
such DMA accesses from the device. When the second kernel reaches the point
of taking over the dwc3 device, re-initializes it, but it is already too
late. Still worse, if the second kernel did not have the dwc3 driver, it
would get endless memory corruptions.
All in all, devices that can do DMA need to stop doing it on shutdown.

Regards,
  Vicenç.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel