[PATCH v3 04/16] dt-bindings: mrvl, intc: Add a MMP3 interrupt controller
From: Lubomir Rintel <lkundrak@v3.sk>
Date: 2019-08-30 22:17:00
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Similar to MMP2 one, but has an extra range for the other core. The muxes stay the same. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes since v2: - Add Rob's Reviewed-by tag Changes since v1: - Reformat the compatible property documentation to higlight the valid combinations - Drop an unneeded mmp3-intc example .../bindings/interrupt-controller/mrvl,intc.txt | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
index 608fee15a4cfc..a0ed02725a9d7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt@@ -1,13 +1,17 @@ * Marvell MMP Interrupt controller Required properties: -- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or - "mrvl,mmp2-mux-intc" +- compatible : Should be + "mrvl,mmp-intc" on Marvel MMP, + "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or + "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 - reg : Address and length of the register set of the interrupt controller. If the interrupt controller is intc, address and length means the range - of the whole interrupt controller. If the interrupt controller is mux-intc, - address and length means one register. Since address of mux-intc is in the - range of intc. mux-intc is secondary interrupt controller. + of the whole interrupt controller. The "marvell,mmp3-intc" controller + also has a secondary range for the second CPU core. If the interrupt + controller is mux-intc, address and length means one register. Since + address of mux-intc is in the range of intc. mux-intc is secondary + interrupt controller. - reg-names : Name of the register set of the interrupt controller. It's only required in mux-intc interrupt controller. - interrupts : Should be the port interrupt shared by mux interrupts. It's
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel