[PATCH v3 2/5] dt-bindings: perf: stm32: ddrperfm support
From: Gerald BAEZA <hidden>
Date: 2019-08-27 15:08:57
Also in:
linux-devicetree, linux-doc, lkml
Subsystem:
arm pmu profiling and debugging, open firmware and flattened device tree bindings, the rest · Maintainers:
Will Deacon, Mark Rutland, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1 SOC. This documentation indicates how to enable stm32-ddr-pmu driver on DDRPERFM peripheral, via the device tree. Signed-off-by: Gerald Baeza <redacted> --- Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
diff --git a/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
new file mode 100644
index 0000000..87ab12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt@@ -0,0 +1,16 @@ +* STM32 DDR Performance Monitor (DDRPERFM) + +Required properties: +- compatible: must be "st,stm32-ddr-pmu". +- reg: physical address and length of the registers set. +- clocks: phandle and specifier for DDRPERFM input clock +- resets: phandle and specifier for DDRPERFM reset + +Example: + ddrperfm: perf@5a007000 { + compatible = "st,stm32-ddr-pmu"; + reg = <0x5a007000 0x400>; + clocks = <&rcc DDRPERFM>; + resets = <&rcc DDRPERFM_R>; + }; +
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel