Thread (12 messages) 12 messages, 4 authors, 2019-08-29
STALE2482d
Revisions (3)
  1. v2 current
  2. v3 [diff vs current]
  3. v4 [diff vs current]

[PATCH v2 4/4] dt-bindings/watchdog: Add access_cs0 option for alt-boot

From: Ivan Mikhaylov <hidden>
Date: 2019-08-26 10:47:20
Also in: linux-aspeed, linux-devicetree, linux-watchdog, lkml, openbmc
Subsystem: open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck

The option for the ast2400/2500 to get access to CS0 at runtime.

Signed-off-by: Ivan Mikhaylov <redacted>
---
 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 7 +++++++
 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index c5077a1f5cb3..023a9b578df6 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -34,6 +34,13 @@ Optional properties:
                 engine is responsible for this.
 
  - aspeed,alt-boot:    If property is present then boot from alternate block.
+                       At alternate side 'access_cs0' sysfs file provides:
+                       ast2400: a way to get access to the primary SPI flash
+                                chip at CS0 after booting from the alternate
+                                chip at CS1.
+                       ast2500: a way to restore the normal address mapping from
+                                (CS0->CS1, CS1->CS0) to (CS0->CS0, CS1->CS1).
+
  - aspeed,external-signal: If property is present then signal is sent to
 			external reset counter (only WDT1 and WDT2). If not
 			specified no external signal is sent.
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help