On 01/08/2019 13:01, Ran Bi wrote:
quoted hunk ↗ jump to hunk
Document the binding for MT2712 RTC implemented by rtc-mt2712.
Signed-off-by: Ran Bi <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/rtc/rtc-mt2712.txt | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
new file mode 100644
index 000000000000..c33d87e5e753
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
@@ -0,0 +1,14 @@
+Device-Tree bindings for MediaTek SoC based RTC
+
+Required properties:
+- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
+- reg : Specifies base physical address and size of the registers;
+- interrupts : Should contain the interrupt for RTC alarm;
No clocks for the RTC? What about CLK_TOP_RTC_SEL from the clk driver?
Regards,
Matthias
+
+Example:
+
+rtc: rtc@10011000 {
+ compatible = "mediatek,mt2712-rtc";
+ reg = <0 0x10011000 0 0x1000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel