[PATCH v2 4/7] arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
From: Manivannan Sadhasivam <hidden>
Date: 2019-08-21 02:41:04
Also in:
linux-clk, linux-devicetree, linux-mmc, lkml
Subsystem:
arm/actions semi architecture, the rest · Maintainers:
Andreas Färber, Manivannan Sadhasivam, Linus Torvalds
Add uSD and eMMC support for Bubblegum96 board based on Actions Semi Owl SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC. Since there is no PMIC support added yet, fixed regulator has been used as a regulator node. Signed-off-by: Manivannan Sadhasivam <redacted> --- .../boot/dts/actions/s900-bubblegum-96.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index 732daaa6e9d3..92376b71cb8f 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts@@ -12,6 +12,9 @@ model = "Bubblegum-96"; aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; serial5 = &uart5; };
@@ -23,6 +26,22 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + vcc_3v1: vcc-3v1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; }; &i2c0 {
@@ -241,6 +260,47 @@ bias-pull-up; }; }; + + mmc0_default: mmc0_default { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + }; + + mmc2_default: mmc2_default { + pinmux { + groups = "nand0_d0_ceb3_mfp"; + function = "sd2"; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_default>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + +/* eMMC */ +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_default>; + no-sdio; + no-sd; + non-removable; + bus-width = <8>; + vmmc-supply = <&vcc_3v1>; }; &timer {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel