[PATCH v13 03/12] dt-binding: gce: add binding for gce client reg property
From: Bibby Hsieh <hidden>
Date: 2019-08-20 08:37:30
Also in:
linux-devicetree, linux-mediatek, lkml
Subsystem:
mailbox api, open firmware and flattened device tree bindings, the rest · Maintainers:
Jassi Brar, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
cmdq driver provide a function that get the relationship of sub system number from device node for client. add specification for #subsys-cells, mediatek,gce-client-reg. Signed-off-by: Bibby Hsieh <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/mailbox/mtk-gce.txt | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 1f7f8f2a3f49..7b13787ab13d 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt@@ -25,8 +25,16 @@ Required properties: Required properties for a client device: - mboxes: Client use mailbox to communicate with GCE, it should have this property and list of phandle, mailbox specifiers. -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding - to the register address. +Optional properties for a client device: +- mediatek,gce-client-reg: Specify the sub-system id which is corresponding + to the register address, it should have this property and list of phandle, + sub-system specifiers. + <&phandle subsys_number start_offset size> + phandle: Label name of a gce node. + subsys_number: specify the sub-system id which is corresponding + to the register address. + start_offset: the start offset of register address that GCE can access. + size: the total size of register address that GCE can access. Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -48,9 +56,9 @@ Example for a client device: compatible = "mediatek,mt8173-mmsys"; mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; - mediatek,gce-subsys = <SUBSYS_1400XXXX>; mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF CMDQ_EVENT_MUTEX1_STREAM_EOF>; - + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, + <&gce SUBSYS_1401XXXX 0x2000 0x100>; ... };
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel