On Thu, Aug 15, 2019 at 2:49 AM Brian Masney [off-list ref] wrote:

When attempting to configure this driver on a Nexus 5 phone (msm8974),
setting up the dummy i2c bus for TX_P0 would fail due to an -EBUSY
error. The downstream MSM kernel sources [1] shows that the proper value
for TX_P0 is 0x78, not 0x70, so correct the value to allow device
probing to succeed.

[1] https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/drivers/video/slimport/slimport_tx_reg.h

Signed-off-by: Brian Masney <redacted>

Reviewed-by: Linus Walleij <redacted>

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel