[PATCH next v9 09/11] usb: common: create Kconfig file
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: 2019-08-13 11:28:04
Also in:
linux-devicetree, linux-mediatek, linux-usb, lkml
Subsystem:
the rest, usb subsystem · Maintainers:
Linus Torvalds, Greg Kroah-Hartman
Create Kconfig file for USB common core, and move USB_LED_TRIG and USB_ULPI_BUS configs into the new file from the parent Kconfig, it will help to add new configs later. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v9 no changes v8: new patch --- drivers/usb/Kconfig | 35 +---------------------------------- drivers/usb/common/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 34 deletions(-) create mode 100644 drivers/usb/common/Kconfig
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6e59d370ef81..7bf94e65ed2f 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig@@ -36,8 +36,7 @@ menuconfig USB_SUPPORT if USB_SUPPORT -config USB_COMMON - tristate +source "drivers/usb/common/Kconfig" config USB_ARCH_HAS_HCD def_bool y
@@ -175,36 +174,4 @@ source "drivers/usb/typec/Kconfig" source "drivers/usb/roles/Kconfig" -config USB_LED_TRIG - bool "USB LED Triggers" - depends on LEDS_CLASS && LEDS_TRIGGERS - select USB_COMMON - help - This option adds LED triggers for USB host and/or gadget activity. - - Say Y here if you are working on a system with led-class supported - LEDs and you want to use them as activity indicators for USB host or - gadget. - -config USB_ULPI_BUS - tristate "USB ULPI PHY interface support" - select USB_COMMON - help - UTMI+ Low Pin Interface (ULPI) is specification for a commonly used - USB 2.0 PHY interface. The ULPI specification defines a standard set - of registers that can be used to detect the vendor and product which - allows ULPI to be handled as a bus. This module is the driver for that - bus. - - The ULPI interfaces (the buses) are registered by the drivers for USB - controllers which support ULPI register access and have ULPI PHY - attached to them. The ULPI PHY drivers themselves are normal PHY - drivers. - - ULPI PHYs provide often functions such as ADP sensing/probing (OTG - protocol) and USB charger detection. - - To compile this driver as a module, choose M here: the module will - be called ulpi. - endif # USB_SUPPORT
diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000000..848545b099cf
--- /dev/null
+++ b/drivers/usb/common/Kconfig@@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_COMMON + tristate + + +config USB_LED_TRIG + bool "USB LED Triggers" + depends on LEDS_CLASS && LEDS_TRIGGERS + select USB_COMMON + help + This option adds LED triggers for USB host and/or gadget activity. + + Say Y here if you are working on a system with led-class supported + LEDs and you want to use them as activity indicators for USB host or + gadget. + +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + select USB_COMMON + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. +
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel