Thread (10 messages) flat view 10 messages, 3 authors, 2019-07-26

Re: [PATCH v7 2/4] drm/panel: set display info in panel attach

From: dbasehore . <hidden>
Date: 2019-07-24 22:15:34
Also in: dri-devel, intel-gfx, linux-mediatek, lkml

Hi Sam, thanks for pointing out the potential conflict.

On Tue, Jul 23, 2019 at 2:19 AM Sam Ravnborg [off-list ref] wrote:
Hi Derek.

On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote:
quoted
Devicetree systems can set panel orientation via a panel binding, but
there's no way, as is, to propagate this setting to the connector,
where the property need to be added.
To address this, this patch sets orientation, as well as other fixed
values for the panel, in the drm_panel_attach function. These values
are stored from probe in the drm_panel struct.
This approch seems to conflict with work done by Laurent where the
ownership/creation of the connector will be moved to the display controller.

If I understand it correct then there should not be a 1:1 relation
between a panel and a connector anymore.

Can you point me to this work? I still see the lone drm_display_info
struct in the drm_connector struct. This seems to indicate that the
kernel still assume one display per connector.
We should not try to work in two different directions with this.
Laurent, can you comment on this?

If we move forard with this patch, then all fields in drm_panel needs
kernel-doc - preferably inline.

        Sam
quoted
Signed-off-by: Derek Basehore <redacted>
---
 drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 14 ++++++++++++++
 2 files changed, 42 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index 169bab54d52d..ca01095470a9 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
  */
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
 {
+     struct drm_display_info *info;
+
      if (panel->connector)
              return -EBUSY;

      panel->connector = connector;
      panel->drm = connector->dev;
+     info = &connector->display_info;
+     info->width_mm = panel->width_mm;
+     info->height_mm = panel->height_mm;
+     info->bpc = panel->bpc;
+     info->panel_orientation = panel->orientation;
+     info->bus_flags = panel->bus_flags;
+     if (panel->bus_formats)
+             drm_display_info_set_bus_formats(&connector->display_info,
+                                              panel->bus_formats,
+                                              panel->num_bus_formats);

      return 0;
 }
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
  */
 int drm_panel_detach(struct drm_panel *panel)
 {
+     struct drm_display_info *info;
+
+     if (!panel->connector)
+             goto out;
+
+     info = &panel->connector->display_info;
+     info->width_mm = 0;
+     info->height_mm = 0;
+     info->bpc = 0;
+     info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+     info->bus_flags = 0;
+     kfree(info->bus_formats);
+     info->bus_formats = NULL;
+     info->num_bus_formats = 0;
+
+out:
      panel->connector = NULL;
      panel->drm = NULL;
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index fc7da55f41d9..a6a881b987dd 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -39,6 +39,8 @@ enum drm_panel_orientation;
  * struct drm_panel_funcs - perform operations on a given panel
  * @disable: disable panel (turn off back light, etc.)
  * @unprepare: turn off panel
+ * @detach: detach panel->connector (clear internal state, etc.)
+ * @attach: attach panel->connector (update internal state, etc.)
  * @prepare: turn on panel and perform set up
  * @enable: enable panel (turn on back light, etc.)
  * @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {

      const struct drm_panel_funcs *funcs;

+     /*
+      * panel information to be set in the connector when the panel is
+      * attached.
+      */
+     unsigned int width_mm;
+     unsigned int height_mm;
+     unsigned int bpc;
+     int orientation;
+     const u32 *bus_formats;
+     unsigned int num_bus_formats;
+     u32 bus_flags;
+
      struct list_head list;
 };

--
2.22.0.410.gd8fdbe21b5-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help