Re: [PATCH net-next v1 1/4] enetc: Clean up local mdio bus allocation
From: Andrew Lunn <andrew@lunn.ch>
Date: 2019-07-24 15:18:13
Also in:
linux-devicetree, lkml, netdev
On Wed, Jul 24, 2019 at 05:41:38PM +0300, Claudiu Manoil wrote:
quoted hunk ↗ jump to hunk
Though it works, this is not how it should have been. What's needed is a pointer to the mdio registers. Store it properly inside bus->priv allocated space. Use devm_* variant to further clean up the init error / remove paths. Fixes following sparse warning: warning: incorrect type in assignment (different address spaces) expected void *priv got struct enetc_mdio_regs [noderef] <asn:2>*[assigned] regs Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> --- v1 - added this patch .../net/ethernet/freescale/enetc/enetc_mdio.c | 31 +++++++------------ 1 file changed, 12 insertions(+), 19 deletions(-)diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c index 77b9cd10ba2b..1e3cd21c13ee 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c@@ -15,7 +15,8 @@ struct enetc_mdio_regs { u32 mdio_addr; /* MDIO address */ }; -#define bus_to_enetc_regs(bus) (struct enetc_mdio_regs __iomem *)((bus)->priv) +#define bus_to_enetc_regs(bus) (*(struct enetc_mdio_regs __iomem **) \ + ((bus)->priv)) #define ENETC_MDIO_REG_OFFSET 0x1c00 #define ENETC_MDC_DIV 258@@ -146,12 +147,12 @@ static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum) int enetc_mdio_probe(struct enetc_pf *pf) { struct device *dev = &pf->si->pdev->dev; - struct enetc_mdio_regs __iomem *regs; + struct enetc_mdio_regs __iomem **regsp; struct device_node *np; struct mii_bus *bus; - int ret; + int err; - bus = mdiobus_alloc_size(sizeof(regs)); + bus = devm_mdiobus_alloc_size(dev, sizeof(*regsp)); if (!bus) return -ENOMEM;@@ -159,41 +160,33 @@ int enetc_mdio_probe(struct enetc_pf *pf) bus->read = enetc_mdio_read; bus->write = enetc_mdio_write; bus->parent = dev; + regsp = bus->priv; snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); /* store the enetc mdio base address for this bus */ - regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET; - bus->priv = regs; + *regsp = pf->si->hw.port + ENETC_MDIO_REG_OFFSET;
This is all very odd and different to every other driver.
If i get the code write, there are 4 registers, each u32 in size,
starting at pf->si->hw.port + ENETC_MDIO_REG_OFFSET?
There are macros like enetc_port_wr() and enetc_global_wr(). It think
it would be much cleaner to add a macro enet_mdio_wr() which takes
hw, off, val.
#define enet_mdio_wr(hw, off, val) enet_port_wr(hw, off + ENETC_MDIO_REG_OFFSET, val)
struct enetc_mdio_priv {
struct enetc_hw *hw;
}
struct enetc_mdio_priv *mdio_priv;
bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
mdio_priv = bus->priv;
mdio_priv->hw = pf->si->hw;
static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
u16 value)
{
struct enetc_mdio_priv *mdio_priv = bus->priv;
...
enet_mdio_wr(priv->hw, ENETC_MDIO_CFG, mdio_cfg);
}
All the horrible casts go away, the driver is structured like every
other driver, sparse is probably happy, etc.
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel