Re: [PATCH v2 00/12] Clean up "mediatek,larb" after adding device_link

Hi, Yong:

I've added log  in mtk_smi_clk_enable() and mtk_smi_clk_disable(), and I
boot MT8183 with display, the log is

[    4.020340] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    4.331371] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[    4.429578] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    4.719743] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[    5.084770] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    5.904310] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()

From the log, the clock is finally turned off, but the display works
normally. This is because scpsys has turn the clock on,

		scpsys: syscon@10006000 {
			compatible = "mediatek,mt8183-scpsys", "syscon";
			#power-domain-cells = <1>;
			reg = <0 0x10006000 0 0x1000>;
			clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
				 <&mmsys CLK_MM_SMI_COMMON>,
				 <&mmsys CLK_MM_GALS_COMM0>,
				 <&mmsys CLK_MM_GALS_COMM1>,
			clock-names = "audio","mm-0",
				      "mm-1", "mm-2";
		}

I'm worried that for MT8173, scpsys would not turn on subsys clock, this
series would let display work abnormally, so I think smi common should
not depend on scpsys to turn on the clock.

You could simply remove the clock parameter in scpsys device node, and
you would see the display works abnormally.

Regards,
CK


On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html

Change notes:
v2:
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (12):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 -----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 -------
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 11 -----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 26 ------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  1 -
 drivers/iommu/mtk_iommu.c                          | 45 +++++++--------------
 drivers/iommu/mtk_iommu_v1.c                       | 39 +++++++-----------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ----------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 21 ----------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ----------------------
 drivers/memory/mtk-smi.c                           | 31 ++++----------
 include/soc/mediatek/smi.h                         | 20 ---------
 23 files changed, 36 insertions(+), 316 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel