Thread (8 messages) 8 messages, 3 authors, 2019-08-12
STALE2496d
Revisions (13)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 [diff vs current]
  7. v7 [diff vs current]
  8. v8 [diff vs current]
  9. v9 [diff vs current]
  10. v9 [diff vs current]
  11. v10 [diff vs current]
  12. v11 [diff vs current]
  13. v12 [diff vs current]

[PATCH 1/5] media: dt-bindings: Add JPEG ENC device tree node document

From: Xia Jiang <hidden>
Date: 2019-07-17 09:31:36
Also in: linux-devicetree, linux-media, linux-mediatek, lkml
Subsystem: media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

add JPEG ENC device tree node document

Change-Id: I9f0a8aec7eced20c88acbc88d6ff179763f91246
Signed-off-by: Xia Jiang <redacted>
---
 .../bindings/media/mediatek-jpeg-encoder.txt  | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
new file mode 100644
index 000000000000..1231fedb70bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
@@ -0,0 +1,33 @@
+* MediaTek JPEG Encoder
+
+MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+Required properties:
+- compatible : must be "mediatek,mtk-jpgenc"
+- reg : physical base address of the JPEG encoder registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current SoCs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Example:
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			<&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help