Thread (25 messages) 25 messages, 4 authors, 2019-07-25
STALE2534d
Revisions (4)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 current

[PATCH v4 7/8] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board

From: Icenowy Zheng <icenowy@aosc.io>
Date: 2019-07-13 03:49:48
Also in: linux-clk, linux-devicetree, linux-gpio, lkml
Subsystem: open firmware and flattened device tree bindings, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

The Lichee Zero Plus is a core board made by Sipeed, with a microUSB
connector on it, TF slot or WSON8 SD chip, optional eMMC or SPI Flash.
It has a gold finger connector for expansion, and UART is available from
reserved pins w/ 2.54mm pitch. The board can use either SoChip S3 or
Allwinner V3L SoCs.

Add the device tree binding of the basic version of the core board --
w/o eMMC or SPI Flash, w/ TF slot or WSON8 SD, and use S3 SoC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
No changes since v3.

Patch introduced in v2.

 Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 000a00d12d6a..48c126a7a848 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -353,6 +353,11 @@ properties:
           - const: licheepi,licheepi-zero
           - const: allwinner,sun8i-v3s
 
+      - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
+        items:
+          - const: sipeed,lichee-zero-plus
+          - const: allwinner,sun8i-s3
+
       - description: Linksprite PCDuino
         items:
           - const: linksprite,a10-pcduino
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help