[PATCH V12 08/12] dt-bindings: Add PCIe supports-clkreq property
From: Vidya Sagar <hidden>
Date: 2019-07-01 12:41:25
Also in:
linux-devicetree, linux-pci, linux-tegra, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Some host controllers need to know the existence of clkreq signal routing to downstream devices to be able to advertise low power features like ASPM L1 substates. Without clkreq signal routing being present, enabling ASPM L1 sub states might lead to downstream devices falling off the bus. Hence a new device tree property 'supports-clkreq' is added to make such host controllers aware of clkreq signal routing to downstream devices. Signed-off-by: Vidya Sagar <redacted> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Thierry Reding <redacted> --- Changes since [v11]: * Rebased on top of linux-next top of the tree Changes since [v10]: * None Changes since [v9]: * None Changes since [v8]: * None Changes since [v7]: * None Changes since [v6]: * None Changes since [v5]: * s/Documentation\/devicetree/dt-bindings/ in the subject Changes since [v4]: * None Changes since [v3]: * Rebased on top of linux-next top of the tree Changes since [v2]: * None Changes since [v1]: * This is a new patch in v2 series Documentation/devicetree/bindings/pci/pci.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 2a5d91024059..29bcbd88f457 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt@@ -27,6 +27,11 @@ driver implementation may support the following properties: - reset-gpios: If present this property specifies PERST# GPIO. Host drivers can parse the GPIO and apply fundamental reset to endpoints. +- supports-clkreq: + If present this property specifies that CLKREQ signal routing exists from + root port to downstream device and host bridge drivers can do programming + which depends on CLKREQ signal existence. For example, programming root port + not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal. PCI-PCI Bridge properties -------------------------
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel