Le vendredi 28 juin 2019 à 16:08 +0200, Hans Verkuil a écrit :

On 6/28/19 4:00 PM, Nicolas Dufresne wrote:

quoted

Le vendredi 28 juin 2019 à 11:10 +0100, Dave Stevenson a écrit :

quoted

Hi Nicolas

On Thu, 27 Jun 2019 at 20:55, Nicolas Dufresne [off-list ref] wrote:

quoted

Hi Dave,

Le jeudi 27 juin 2019 à 20:55 +0200, Stefan Wahren a écrit :

quoted

From: Dave Stevenson <redacted>

H264 header come from VC with 0 timestamps, which means they get a
strange timestamp when processed with VC/kernel start times,
particularly if used with the inline header option.
Remember the last frame timestamp and use that if set, or otherwise
use the kernel start time.

Normally H264 headers are considered to be part of the following frame.
Giving it the timestamp of the previous frame will likely confuse some
userspace and cause an off-by-one in timestamp. I understand this is a
workaround, but am wondering if this can be improved.

Sorry, slight ambiguity in how I'm reading your comment.

Are you saying that the header bytes want to be in the same buffer as
the following frame?
I thought this had also been discussed in the V4L2 stateful codec API
threads along with how many encoded frames were allowed in a single
V4L2 buffer. I certainly hadn't seen a statement about the header
bytes being combined with the next frame.
If the behaviour required by V4L2 is that header bytes and following
frame are in the same buffer, then that is relatively easy to achieve
in the firmware. This workaround can remain for older firmware as it
will never trigger if the firmware has combined the frames.

The frame alignment is a requirement specific to the stateful codec
API.

Is it? I don't remember it being specified anywhere explicitly.
Here is the latest text:

https://hverkuil.home.xs4all.nl/codec-api/uapi/v4l/dev-encoder.html

I'll start a new thread about this, since this really needs to be
clarified.

Ok, let's clarify this, but before we start, a quick reminder that this
is what userspace assumes already, so breaking this will cause
regressions all over.

Regards,

	Hans

 Stateful codec must interpret _H264 format as being one full frame

quoted

per buffer (1 AU in progressive, and 1 to 2 AU in interlaced), the
first frame should include SPS/PPS and any other prefix NALs. You may
follow this rule in your capture driver if you want to make it possible
to zero-copy the encoded frames from the capture to the decoder.
Though, userspace will still have to parse as there is no indication
for capture devices of the H264 alignment being used (that imply 1
frame latency). Boris is working on a control for stateless CODEC to
control if we are running in full-frame or per slices. I do hope this
control will be extended later to allow cameras and decoders to signal
their alignment, or simply to allow enabling low-latency modes
supported by CODA and ZynMP firmwares.

quoted

Or are you saying that the header bytes remain in their own buffer,
but the timestamp wants to be the same as the next frame? That is
harder to achieve in the firmware, but could probably be done in the
kernel driver by holding on to the header bytes frame until the next
buffer had been received, at which point the timestamp can be copied
across. Possible, but just needs slightly careful handling to ensure
we don't lose buffers accidentally.

So this isn't specified by V4L2 itself. So instead I rely on H264 and
MPEG TS specification to advance this. This is also the interpretation
we have of timestamp in GStreamer (ffmpeg uses out-of-band headers with
full frame AVC, so this does not apply).

So H264 AUD, SPS, PPS, SEI and other prefix NAL are considered to be
the start of a frame. With this interpretation in mind, accumulating
them is considered zero-latency. This basically means that if they are
to have a timestamp, they would share that timestamp with all the
slices of the same frame. In GStreamer, we have the notion of no
timestamp, so in such a case we'd leave the timestamp empty and our
parsers would pick the first valid timestamp that formed the full frame
as being the frame timestamp (it's a bit buggier then that, but that's
what it's suppose to do).

On top of that, if you don't have any meaningful alignment in your H264
stream, the MPEG TS format states that the timestamp of a buffer should
be the timestamp of the first NAL starting within this buffer, or the
timestamp of the current NAL if there is not NAL start.

By respecting these standards you ensure that latency aware application
can work with your driver without causing delays, or worst, having to
deal with artificially late frames.

I hope this clarify and helps understand my request for "unhacking" the
headers timestamps. I had assumed the timestamp came from the driver
(instead of from the firmware), sorry if that caused confusion. If
merging full frames is easier, I think I would opt for that as it's
beneficial to performance when combined with other full frame APIs.

Nicolas

quoted

  Dave

quoted

quoted

Link: https://github.com/raspberrypi/linux/issues/1836
Signed-off-by: Dave Stevenson <redacted>
---
 .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c  | 14 ++++++++++++--
 .../staging/vc04_services/bcm2835-camera/bcm2835-camera.h  |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index dce6e6d..0c04815 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c

@@ -359,7 +359,9 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
              }
      } else {
              if (dev->capture.frame_count) {
-                     if (dev->capture.vc_start_timestamp != -1 && pts) {
+                     if (dev->capture.vc_start_timestamp != -1) {
+                             buf->vb.vb2_buf.timestamp = ktime_get_ns();
+                     } else if (pts) {
                              ktime_t timestamp;
                              s64 runtime_us = pts -
                                  dev->capture.vc_start_timestamp;

@@ -372,8 +374,15 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
                                       ktime_to_ns(timestamp));
                              buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp);
                      } else {
-                             buf->vb.vb2_buf.timestamp = ktime_get_ns();
+                             if (dev->capture.last_timestamp) {
+                                     buf->vb.vb2_buf.timestamp =
+                                             dev->capture.last_timestamp;
+                             } else {
+                                     buf->vb.vb2_buf.timestamp =
+                                             ktime_to_ns(dev->capture.kernel_start_ts);
+                             }
                      }
+                     dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp;

                      vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length);
                      vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);

@@ -541,6 +550,7 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
                       dev->capture.vc_start_timestamp, parameter_size);

      dev->capture.kernel_start_ts = ktime_get();
+     dev->capture.last_timestamp = 0;

      /* enable the camera port */
      dev->capture.port->cb_ctx = dev;

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
index 2b5679e..09273b0 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h

@@ -90,6 +90,8 @@ struct bm2835_mmal_dev {
              s64         vc_start_timestamp;
              /* Kernel start timestamp for streaming */
              ktime_t kernel_start_ts;
+             /* Timestamp of last frame */
+             u64             last_timestamp;

              struct vchiq_mmal_port  *port; /* port being used for capture */
              /* camera port being used for capture */
--

2.7.4