[PATCH v2 13/19] dt-bindings: phy: Add Marvell COMPHY clocks
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2019-06-27 12:24:59
Also in:
linux-devicetree
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Marvell CP110 COMPHY block is fed by 3 clocks. Describe each of them in the bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../devicetree/bindings/phy/phy-mvebu-comphy.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index cf2cd86db267..8c60e6985950 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt@@ -25,6 +25,13 @@ Required properties: - #address-cells: should be 1. - #size-cells: should be 0. +Optional properlties: + +- clocks: pointers to the reference clocks for this device (CP110 only), + consequently: MG clock, MG Core clock, AXI clock. +- clock-names: names of used clocks for CP110 only, must be : + "mg_clk", "mg_core_clk" and "axi_clk". + A sub-node is required for each comphy lane provided by the comphy. Required properties (child nodes):
@@ -39,6 +46,9 @@ Examples: compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; marvell,system-controller = <&cpm_syscon0>; + clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>;
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel