[PATCH v2 3/9] dt-bindings: i2c: at91: add binding for enable-dig-filtr
From: <hidden>
Date: 2019-06-25 08:05:02
Also in:
linux-devicetree, linux-i2c, lkml
Subsystem:
i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Eugen Hristev <redacted> Add binding specificatoin for digital filter inside the i2c controller Signed-off-by: Eugen Hristev <redacted> --- Documentation/devicetree/bindings/i2c/i2c-at91.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 2210f43..8268595 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt@@ -20,6 +20,9 @@ Optional properties: capable I2C controllers. - i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" and "atmel,sama5d2-i2c". +- enable-dig-filt: Enable the built-in digital filter on the i2c lines, + specifically required depending on the hardware PCB/board and if the + version of the controller includes it. - Child nodes conforming to i2c bus binding Examples :
@@ -56,6 +59,7 @@ i2c0: i2c@f8034600 { clocks = <&flx0>; atmel,fifo-size = <16>; i2c-sda-hold-time-ns = <336>; + enable-dig-filt; wm8731: wm8731@1a { compatible = "wm8731";
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel