[PATCH v2 3/9] ARM: dts: sun8i: r40: Use tcon top clock index macros
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2019-06-14 16:43:56
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
tcon_tv0, tcon_tv1 nodes have a clock names of tcon-ch0, tcon-ch1 which are referring tcon_top clocks via index numbers like 0, 1 with CLK_TCON_TV0 and CLK_TCON_TV1 respectively. Use the macro in place of index numbers, for more code readability. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun8i-r40.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index bb856e53b806..219d2dca16b3 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi@@ -44,6 +44,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> +#include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-de2.h>
@@ -704,7 +705,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c73000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV0>; reset-names = "lcd";
@@ -747,7 +748,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c74000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV1>; reset-names = "lcd";
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel