Thread (21 messages) 21 messages, 2 authors, 2019-06-14
STALE2561d
Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 5/9] ARM: dts: sun8i: r40: Add TCON TOP LCD clocking

From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2019-06-13 18:54:14
Also in: dri-devel, linux-devicetree, lkml
Subsystem: common clk framework, drm driver for allwinner de2 and de3 engine, drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, open firmware and flattened device tree bindings, the rest · Maintainers: Michael Turquette, Stephen Boyd, Chen-Yu Tsai, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

According to Fig 7-2. TCON Top Block Diagram in User manual.

TCON TOP can have an hierarchy for TCON_LCD0, LCD1 like
TCON_TV0, TV1 so, the tcon top would handle the clocks of
TCON_LCD0, LCD1 similar like TV0, TV1.

But, the current tcon_top node is using dsi clock name with
CLK_DSI_DPHY which is ideally handle via dphy which indeed
a separate interface block.

So, use tcon-lcd0 instead of dsi which would refer the
CLK_TCON_LCD0 similar like CLK_TCON_TV0 with tcon-tv0.

This way we can refer CLK_TCON_LCD0 from tcon_top clock in
tcon_lcd0 node and the actual DSI_DPHY clock node would
refer in dphy node.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/sun8i-r40.dtsi           | 6 +++---
 drivers/gpu/drm/sun4i/sun8i_tcon_top.c     | 6 +++---
 include/dt-bindings/clock/sun8i-tcon-top.h | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 219d2dca16b3..12576536df4a 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -591,16 +591,16 @@
 				 <&ccu CLK_TVE0>,
 				 <&ccu CLK_TCON_TV1>,
 				 <&ccu CLK_TVE1>,
-				 <&ccu CLK_DSI_DPHY>;
+				 <&ccu CLK_TCON_LCD0>;
 			clock-names = "bus",
 				      "tcon-tv0",
 				      "tve0",
 				      "tcon-tv1",
 				      "tve1",
-				      "dsi";
+				      "tcon-lcd0";
 			clock-output-names = "tcon-top-tv0",
 					     "tcon-top-tv1",
-					     "tcon-top-dsi";
+					     "tcon-top-lcd0";
 			resets = <&ccu RST_BUS_TCON_TOP>;
 			#clock-cells = <1>;
 
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index 465e9b0cdfee..e23c19f18986 100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -205,11 +205,11 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
 						     CLK_TCON_TOP_TV1);
 
 	if (quirks->has_dsi)
-		clk_data->hws[CLK_TCON_TOP_DSI] =
-			sun8i_tcon_top_register_gate(dev, "dsi", regs,
+		clk_data->hws[CLK_TCON_TOP_LCD0] =
+			sun8i_tcon_top_register_gate(dev, "tcon-lcd0", regs,
 						     &tcon_top->reg_lock,
 						     TCON_TOP_TCON_DSI_GATE,
-						     CLK_TCON_TOP_DSI);
+						     CLK_TCON_TOP_LCD0);
 
 	for (i = 0; i < CLK_NUM; i++)
 		if (IS_ERR(clk_data->hws[i])) {
diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h
index 25164d767835..88de3f2ba335 100644
--- a/include/dt-bindings/clock/sun8i-tcon-top.h
+++ b/include/dt-bindings/clock/sun8i-tcon-top.h
@@ -6,6 +6,6 @@
 
 #define CLK_TCON_TOP_TV0	0
 #define CLK_TCON_TOP_TV1	1
-#define CLK_TCON_TOP_DSI	2
+#define CLK_TCON_TOP_LCD0	2
 
 #endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help