Thread (8 messages) 8 messages, 2 authors, 2019-06-13

Re: [PATCH 2/2] i3c: master: Add driver for MediaTek IP

From: Boris Brezillon <boris.brezillon@collabora.com>
Date: 2019-06-11 12:28:57
Also in: linux-devicetree, linux-i3c, linux-mediatek, lkml

On Tue, 11 Jun 2019 20:25:22 +0800
Qii Wang [off-list ref] wrote:
On Tue, 2019-06-04 at 20:26 +0800, Qii Wang wrote:
quoted
On Tue, 2019-06-04 at 09:58 +0200, Boris Brezillon wrote:  
quoted
On Mon, 3 Jun 2019 11:51:03 +0800
Qii Wang [off-list ref] wrote:

  
quoted
+static int mtk_i3c_master_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_i3c_master *master;
+	struct resource *res;
+	int ret, irqnr;
+
+	master = devm_kzalloc(dev, sizeof(*master), GFP_KERNEL);
+	if (!master)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "main");
+	master->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(master->regs))
+		return PTR_ERR(master->regs);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+	master->dma_regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(master->dma_regs))
+		return PTR_ERR(master->dma_regs);
+
+	irqnr = platform_get_irq(pdev, 0);
+	if (irqnr < 0)
+		return irqnr;
+
+	ret = devm_request_irq(dev, irqnr, mtk_i3c_master_irq,
+			       IRQF_TRIGGER_NONE, DRV_NAME, master);
+	if (ret < 0) {
+		dev_err(dev, "Request I3C IRQ %d fail\n", irqnr);
+		return ret;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-div",
+				   &master->clk_src_div);  
You say in one comment that this clock divider is fixed in HW but might
change on a per-SoC basis. If that's the case, you should get rid of
this clock-div prop and attach the divider to the compatible (using an
mtk_i3c_master_variant struct that contains a divider field).
  
ok, I will attach the divider to the compatible.
  
I have rechecked your comment, maybe I have misunderstood what you mean.
"clock-div" changes according to i2c source clock, different project may
change i2c source clock, The previous dt-binding may be misleading, I
will modify it.
Is it fixed or configurable? Maybe it should be modeled as a clk
driver. What's for sure is that we shouldn't have this divider defined
in the DT.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help