@@ -48,11 +48,11 @@
 
 /* Rx Interrupt Enable */
 #define SUNXI_IR_RXINT_REG    0x2C
-/* Rx FIFO Overflow */
+/* Rx FIFO Overflow Interrupt Enable */
 #define REG_RXINT_ROI_EN		BIT(0)
-/* Rx Packet End */
+/* Rx Packet End Interrupt Enable */
 #define REG_RXINT_RPEI_EN		BIT(1)
-/* Rx FIFO Data Available */
+/* Rx FIFO Data Available Interrupt Enable */
 #define REG_RXINT_RAI_EN		BIT(4)
 
 /* Rx FIFO available byte level */

@@ -60,6 +60,12 @@
 
 /* Rx Interrupt Status */
 #define SUNXI_IR_RXSTA_REG    0x30
+/* Rx FIFO Overflow */
+#define REG_RXSTA_ROI			REG_RXINT_ROI_EN
+/* Rx Packet End */
+#define REG_RXSTA_RPE			REG_RXINT_RPEI_EN
+/* Rx FIFO Data Available */
+#define REG_RXSTA_RA			REG_RXINT_RAI_EN
 /* RX FIFO Get Available Counter */
 #define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
 /* Clear all interrupt status value */

@@ -119,7 +125,7 @@ static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
 	/* clean all pending statuses */
 	writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
 
-	if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) {
+	if (status & (REG_RXSTA_RA | REG_RXSTA_RPE)) {
 		/* How many messages in fifo */
 		rc  = REG_RXSTA_GET_AC(status);
 		/* Sanity check */

@@ -135,9 +141,9 @@ static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
 		}
 	}
 
-	if (status & REG_RXINT_ROI_EN) {
+	if (status & REG_RXSTA_ROI) {
 		ir_raw_event_reset(ir->rc);
-	} else if (status & REG_RXINT_RPEI_EN) {
+	} else if (status & REG_RXSTA_RPE) {
 		ir_raw_event_set_idle(ir->rc, true);
 		ir_raw_event_handle(ir->rc);
 	}