[PATCH v2 1/7] clk: bcm2835: remove pllb
From: Nicolas Saenz Julienne <hidden>
Date: 2019-06-06 14:23:56
Also in:
linux-clk, linux-pm, lkml
Subsystem:
common clk framework, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Linus Torvalds
Raspberry Pi's firmware controls this pll, we should use the firmware interface to access it. Signed-off-by: Nicolas Saenz Julienne <redacted> Acked-by: Eric Anholt <redacted> --- Changes since v1: - Add comment to explain why pllb isn't there anymore drivers/clk/bcm/clk-bcm2835.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 770bb01f523e..867ae3c20041 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c@@ -1651,30 +1651,10 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* PLLB is used for the ARM's clock. */ - [BCM2835_PLLB] = REGISTER_PLL( - .name = "pllb", - .cm_ctrl_reg = CM_PLLB, - .a2w_ctrl_reg = A2W_PLLB_CTRL, - .frac_reg = A2W_PLLB_FRAC, - .ana_reg_base = A2W_PLLB_ANA0, - .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, - .lock_mask = CM_LOCK_FLOCKB, - - .ana = &bcm2835_ana_default, - - .min_rate = 600000000u, - .max_rate = 3000000000u, - .max_fb_rate = BCM2835_MAX_FB_RATE), - [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( - .name = "pllb_arm", - .source_pll = "pllb", - .cm_reg = CM_PLLB, - .a2w_reg = A2W_PLLB_ARM, - .load_mask = CM_PLLB_LOADARM, - .hold_mask = CM_PLLB_HOLDARM, - .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + /* + * PLLB is used for the ARM's clock. Controlled by firmware, see + * clk-raspberrypi.c. + */ /* * PLLC is the core PLL, used to drive the core VPU clock.
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel