From: Daniel Baluta <daniel.baluta@nxp.com>

This patch series introduces the SAI nodes on i.MX8MM EVK then
creates the wm8524 codec node and finally uses simple card machine
driver to create a sound card.

Changes since v3:
	- rebased on latest for-next branch
	- fixed encoding problems

Changes since v2:
       - place compatible strings one a single lines
       - move GPIO pinctrl in a node of its own
       - remove codec phandle

Changes since v1:
        - use "fsl,imx8mm-sai", "fsl,imx8mq-sai" compatbile strings and
          remove "fsl,imx6sx-sai" because SAI module on i.MX8M is not
          compatbile with SAI modules form i.MX6

Daniel Baluta (2):
  arm64: dts: imx8mm: Add SAI nodes
  arm64: dts: imx8mm-evk: Enable audio codec wm8524

 arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 55 ++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi    | 66 ++++++++++++++++++++
 2 files changed, 121 insertions(+)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel