[PATCH] dt-bindings: imx: Correct pinfunc head file path for i.MX8MM
From: <hidden>
Date: 2019-05-30 04:42:41
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, pin controller - freescale, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Dong Aisheng, Fabio Estevam, Frank Li, Jacky Bai, Linus Torvalds
From: Anson Huang <redacted> The i.MX8MM pinfunc head file is located in DT folder, correct it. Signed-off-by: Anson Huang <redacted> --- Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
index 524a16f..e4e01c0 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt@@ -12,7 +12,7 @@ Required properties in sub-nodes: - fsl,pins: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is + <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel